Welcome to the SR20 Community Forum - The Dash.
Results 1 to 25 of 25
  1. #1
    ALL DAY
    User Info
    Join Date: Jun 2008
    Location: SoCal
    Posts: 217
    Feedback Score: 6 (100%)

    Default B13/B14/N14/N15 6 Speed Hub

    B13/B14/N14/N15 6 Speed Hub made by #TDMImports
    (Recently Revealed At the National Convention 2016)

    Introducing the 6 Speed Solid Hub Replacement Option in 4x100 For The 6 Speed Swap! These hubs allow you to retain your existing brake and wheel set up along with using a "13" inch Drag wheel combo. Simply Press in and Go.


    Details:


    -Hubs are OEM spec and are not a respline. This means factory B Chassis Hub Bore (59.1), bearing, lug stud knurl, and lug pattern.
    -Fits 6 Speed Axles ( 27.8mm diameter x 27 spline)
    -Forged Extended Lug Studs Can Be pre-installed if Purchased
    -Lifetime Manufacture's Warranty with #TDMImports ( Excluding the lug studs)
    -Retail Price is $280.00 USD + Shipping ($40.00)
    -International Shipping - ($55.00 USD)
    -Forged Lug Stud Upgrade is $44.00 USD
    -Release Date: September 1st, 2016
    -Purchases are currently offered through #KlutchHeadQuarterz
    (Replacement Bearings are Not Included)


    Pre-Order Information:


    - All Pre-Orders will be $280.00 USD Shipped in the US and $295.00 USD Shipped for international orders.
    -Pre-Ordered 65mm Extended Lug Studs Will Be $22.50 USD Additional
    -Pre-Orders Will End August 31st, 2016
    -Payments are accepted Via PayPal only.
    -Paypal Fees will be covered by KHQ for Pre-Orders only.
    -Please Message KHQ Directly For Ordering Information


    Here is a link to my Klutch HeadQuarterz Facebook Page:


    https://m.facebook.com/KLUTCHHEADQUARTERZ/


    Gotta Love Having Options!
    #KHQ













    Last edited by KLUTCH; 08-11-16 at 01:38 AM.
    Likes curlz7819, Arteeste, Keo, BigMo, eggman and 5 others Liked this post
     

  2. #2
    Exhaustipation!
    User Info
    Join Date: Nov 2009
    Location: TEXAS!
    Posts: 3,349
    Feedback Score: 6 (100%)

    Default

    Great product.

    I sure wanted to win a set of these!
    Likes b15azn, KLUTCH Liked this post
     
    The Build

  3. #3
    TROUT!
    User Info
    Join Date: Dec 2012
    Location: Carifornia
    Posts: 1,254
    Feedback Score: 6 (100%)

    Default

    Pat,

    I don't have faceballs. PM me with deets. I'm interested in a spare set.

    also.... since these are basically modified b13 resplines, did they correct the length issue on the drivers side?
    Last edited by zeneffect; 08-10-16 at 03:38 PM.

  4. #4
    OEM Plus.
    User Info
    Join Date: Dec 2007
    Posts: 11,122
    Feedback Score: 51 (100%)

    Default

    I saw these in person at the Convention. Pretty much shames DSS to hell and back.

  5. #5
    TROUT!
    User Info
    Join Date: Dec 2012
    Location: Carifornia
    Posts: 1,254
    Feedback Score: 6 (100%)

    Default

    Indeed. Dss had issues getting the axle in. This is showing an actual quality part. Me wants, no faceballs.

    Pm me @KLUTCH
    Likes b15azn, KLUTCH Liked this post
     

  6. #6
    ALL DAY
    User Info
    Join Date: Jun 2008
    Location: SoCal
    Posts: 217
    Feedback Score: 6 (100%)

    Default

    Quote Originally Posted by zeneffect View Post
    Indeed. Dss had issues getting the axle in. This is showing an actual quality part. Me wants, no faceballs.

    Pm me @KLUTCH
    All PMS Replied.
    Likes b15azn Liked this post
     

  7. #7
    TROUT!
    User Info
    Join Date: Dec 2012
    Location: Carifornia
    Posts: 1,254
    Feedback Score: 6 (100%)

    Default

    @KLUTCH

    Pm'd and paypal'd.

  8. #8
    TROUT!
    User Info
    Join Date: Dec 2012
    Location: Carifornia
    Posts: 1,254
    Feedback Score: 6 (100%)
    Last edited by zeneffect; 08-11-16 at 02:42 PM.

  9. #9
    Exhaustipation!
    User Info
    Join Date: Nov 2009
    Location: TEXAS!
    Posts: 3,349
    Feedback Score: 6 (100%)

    Default

    In other words, would we still be required to grind the high area behind the splines on the 6 speed shaft?

  10. #10
    ALL DAY
    User Info
    Join Date: Jun 2008
    Location: SoCal
    Posts: 217
    Feedback Score: 6 (100%)

    Default

    Quote Originally Posted by zeneffect View Post
    That will not be an issue here. They are well thought out.
     

  11. #11
    TROUT!
    User Info
    Join Date: Dec 2012
    Location: Carifornia
    Posts: 1,254
    Feedback Score: 6 (100%)

    Default

    Quote Originally Posted by KLUTCH View Post
    Quote Originally Posted by zeneffect View Post
    That will not be an issue here. They are well thought out.
    Those are the magic words. Thanks!
    Likes KLUTCH Liked this post
     

  12. #12
    Member
    User Info
    Join Date: Nov 2009
    Posts: 668
    Feedback Score: 13 (100%)

    Default

    Quote Originally Posted by 1fastser View Post
    In other words, would we still be required to grind the high area behind the splines on the 6 speed shaft?
    Direct fitment !! Plug and Play just like our 5 lug swap kit with b15 knuckles !!!
    Likes lynchfourtwenty Liked this post
     

  13. #13
    Addicted to SR20's
    User Info
    Join Date: Dec 2007
    Location: Corpus Christi, Tejas
    Posts: 1,637
    Feedback Score: 35 (100%)

    Default

    Nice
    '92 SE-R Undergoing a transformation - '05 NISMO Frontier 4WD CC - '08 M35 - '00 P11 DD - The Boomerang

  14. #14
    ALL DAY
    User Info
    Join Date: Jun 2008
    Location: SoCal
    Posts: 217
    Feedback Score: 6 (100%)

    Default

    Pre-Orders Are Now Closed. Please PM me or Message directly @KHQ.

  15. #15
    Member
    User Info
    Join Date: Nov 2010
    Location: CA
    Posts: 733
    Feedback Score: 5 (100%)

    Default B13/B14/N14/N15 6 Speed Hub

    I saw in the pic the Driver Side. How about the passenger side?


    Sent from my iPhone using Tapatalk

  16. #16
    TROUT!
    User Info
    Join Date: Dec 2012
    Location: Carifornia
    Posts: 1,254
    Feedback Score: 6 (100%)

    Default

    Hubs are the same, drivers side was the only one with issues from dss due to the ridge on the axle.

    Received mine today, and to clarify, the price is per set, not per hub. I didn't know this and now have 4 hubs. Probably should have asked but whatever, doesn't hurt to have spares

  17. #17
    OEM Plus.
    User Info
    Join Date: Dec 2007
    Posts: 11,122
    Feedback Score: 51 (100%)

    Default

    Quote Originally Posted by zeneffect View Post
    Hubs are the same, drivers side was the only one with issues from dss due to the ridge on the axle.

    Received mine today, and to clarify, the price is per set, not per hub. I didn't know this and now have 4 hubs. Probably should have asked but whatever, doesn't hurt to have spares
    Not a bad oversight. Certainly better to be heavy handed than light handed.

  18. #18
    Member
    User Info
    Join Date: Nov 2010
    Location: CA
    Posts: 733
    Feedback Score: 5 (100%)

    Default B13/B14/N14/N15 6 Speed Hub

    Quote Originally Posted by zeneffect View Post
    Hubs are the same, drivers side was the only one with issues from dss due to the ridge on the axle.

    Received mine today, and to clarify, the price is per set, not per hub. I didn't know this and now have 4 hubs. Probably should have asked but whatever, doesn't hurt to have spares
    Well are just here to pick up the spare... Lol

  19. #19
    ALL DAY
    User Info
    Join Date: Jun 2008
    Location: SoCal
    Posts: 217
    Feedback Score: 6 (100%)

    Default

    Fellas, we are running a Black Friday Special on the hubs. 230 shipped (World Wide) + Paypal Fees until 11/30/16
    Likes 91sentragti-r, Scrildo Liked this post
     

  20. #20
    Member
    User Info
    Join Date: Nov 2010
    Location: CA
    Posts: 733
    Feedback Score: 5 (100%)

    Default B13/B14/N14/N15 6 Speed Hub

    Quote Originally Posted by zeneffect View Post
    Hubs are the same, drivers side was the only one with issues from dss due to the ridge on the axle.

    Received mine today, and to clarify, the price is per set, not per hub. I didn't know this and now have 4 hubs. Probably should have asked but whatever, doesn't hurt to have spares
    Bro what axles did you use? I have a P12 halfcut


    Sent from my iPad using Tapatalk

  21. #21
    SR20VE-T Boost Junky!
    User Info
    Join Date: Sep 2008
    Location: Washougal, Washington
    Posts: 9,835
    Feedback Score: 17 (100%)

    Default

    Quote Originally Posted by datsun_sky View Post
    Quote Originally Posted by zeneffect View Post
    Hubs are the same, drivers side was the only one with issues from dss due to the ridge on the axle.

    Received mine today, and to clarify, the price is per set, not per hub. I didn't know this and now have 4 hubs. Probably should have asked but whatever, doesn't hurt to have spares
    Bro what axles did you use? I have a P12 halfcut


    Sent from my iPad using Tapatalk
    I had to make him a custom drivers axle, the spec-v axle was too long so I took the end pieces and put them on a b13 shaft and it fits fine

  22. #22
    ALL DAY
    User Info
    Join Date: Jun 2008
    Location: SoCal
    Posts: 217
    Feedback Score: 6 (100%)

    Default

    Tons in Stock! Bump!

  23. #23
    TROUT!
    User Info
    Join Date: Dec 2012
    Location: Carifornia
    Posts: 1,254
    Feedback Score: 6 (100%)

    Default

    Why was there a severe axle bind issue on stock driver's side spec v axle? They are a little too long without having to make a hybrid axle which is not mentioned.

  24. #24
    SR20VE-T Boost Junky!
    User Info
    Join Date: Sep 2008
    Location: Washougal, Washington
    Posts: 9,835
    Feedback Score: 17 (100%)

    Default

    You couldn't actually install the axle fully, the top strut bolt on the spindle was off by half a bolt hole. The axles I tried were oem 04 and 06 spec v 6 speed non abs axles, at the end of the day a hybrid had to be made, we measured an the spec v axle shaft was only 1/16" thicker so not much beefier..
    Last edited by lynchfourtwenty; Yesterday at 12:44 AM.

  25. #25
    OEM Plus.
    User Info
    Join Date: Dec 2007
    Posts: 11,122
    Feedback Score: 51 (100%)

    Default

    Photos got Pee-bucketed.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to top