|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
|
#1 (permalink) |
|
Formerly TeKKiE
|
http://videos.streetfire.net/video/n...rbo_166422.htm
Who's is it? Saw this while browsing streetfire today. Good run, nice time ![]()
__________________
SR20DEEPMD... ● '98 SE-R - Bitch boost - RUNNING AGAIN!!! ● '05 Armada - Tow Truck ● '84 910 Deluxe - Runs! ![]() WTT: SportMax/XXR 16" 002's - Gunmetal
|
|
|
|
|
|
#3 (permalink) |
|
WomeniSER
|
Very nice, It's got looks and speed
an overall classic B13.
__________________
"blouse an skirt da VVL wicked" 20VE/HP10: Thermoblock spacers, Stock Sr20ve header w/ custom secondaries 3" inlet, 10lbs flywheel, clutch, Nismo FPR, E60 maf Calum basic soon......... |
|
|
|
|
|
#9 (permalink) |
|
Member
|
Yes in fact that's Pito's car the next pass after that one he made 10.9 @ 128 and yes Rob that is the one I was telling you about but the 10 sec. pass was not recorded but the car needs a 4 point cage to keep running in the 10s but the owner doesnt want to because its a daily driver in full use...
|
|
|
|
|
|
#10 (permalink) | |
|
Old School
|
Quote:
Can you give us any details on the build? |
|
|
|
|
|
|
#11 (permalink) |
|
Member
|
It's prety simple build the engine It's a Stock SR20VE with CP 8.5:1 86mm Pistons and Eagle rods. The head have BC springs and stock SR20VE cams and fire rings made for better HG seal as he use stock SR20VE HG and stock head bolts . The car uses a Turbonetics 62-1 ball bearing turbo with .82 housing and a P-Trim wheel. And on the fuel setup it has a walbro 255lph fuel pump and Titek 850cc injectors with a Z32 Maf controlled with a stock ECU tuned with a Calum B13/S13 basic board. Those passes were made at 26psi of boost.. since the manual boost controller doesnt allow more than that....
|
|
|
|
|
|
#14 (permalink) | |
|
Weekend Warrior
|
Quote:
|
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|