Drag Slicks, correct fitting size
Okay My car has 16 x 7 inch rims, tyres on there now 205/45/R16
They look like this with at least a fist and a half space inside the inner wheel section of the car
Team Dynamic, Pro Race 1.2 16 x 7 et 38
The car they will be going onto
Nissan Sunny Gti N14
Reason I still have 16's is because of my big brakes that can only fit under 16's
I have made enquiries about some M/T street et's
Spec below.
Dear Mickey Thompson Tires
I am after buying a set of ET Street Radials x 2, just for the two front wheels
90000000996- Material #
3793R- Part #
P255/50R16- Size
26x10.50R16- Size Equivalent
29- Appx. Weight
R2- Compound
7.0-9.0- Approved Rims
8- Measuring Rim
10.5- Section Width
9.6- Tread Width
26.1- Overall Diameter
82- Cir
I would like to know if these would fit on my wheels or the actual car, is there enough space to go in the arches?
So if I play around with ride height, suspension settings, will they fit?
Mickey Thompson has come back to me...
From: @mickeythompsontires.com] On Behalf Of MT International
Andrew,
Thank you for contacting us as well as your interest in our products, regarding your question the ET Street Radial Part# 3793R approved rim with is 7"-9" so yes it will fit your wheel..........
But will it fit under the arch?
Others have stated
Originally Posted by warpspeed
255's under standard arches! Haha, dream on!
Originally Posted by Mad4it
I doubt it without raising your ride height considerably as genuine quarter mile slicks like Hoosier sit high then reduce in height when under load and widen to gain more traction.
I used to run 13" rims with Hoosier slicks and they are very very big
Also, they may hit the inside frame too when under load unless you run some big spacers too
So my main question is, has anyone run this size on a Sentra as I believe the arch space is the same.
They look like this with at least a fist and a half space inside the inner wheel section of the car
Team Dynamic, Pro Race 1.2 16 x 7 et 38
The car they will be going onto
Nissan Sunny Gti N14
Reason I still have 16's is because of my big brakes that can only fit under 16's
I have made enquiries about some M/T street et's
Spec below.
Dear Mickey Thompson Tires
I am after buying a set of ET Street Radials x 2, just for the two front wheels
90000000996- Material #
3793R- Part #
P255/50R16- Size
26x10.50R16- Size Equivalent
29- Appx. Weight
R2- Compound
7.0-9.0- Approved Rims
8- Measuring Rim
10.5- Section Width
9.6- Tread Width
26.1- Overall Diameter
82- Cir
I would like to know if these would fit on my wheels or the actual car, is there enough space to go in the arches?
So if I play around with ride height, suspension settings, will they fit?
Mickey Thompson has come back to me...
From: @mickeythompsontires.com] On Behalf Of MT International
Andrew,
Thank you for contacting us as well as your interest in our products, regarding your question the ET Street Radial Part# 3793R approved rim with is 7"-9" so yes it will fit your wheel..........
But will it fit under the arch?
Others have stated
Originally Posted by warpspeed255's under standard arches! Haha, dream on!
Originally Posted by Mad4itI doubt it without raising your ride height considerably as genuine quarter mile slicks like Hoosier sit high then reduce in height when under load and widen to gain more traction.
I used to run 13" rims with Hoosier slicks and they are very very big
Also, they may hit the inside frame too when under load unless you run some big spacers too
So my main question is, has anyone run this size on a Sentra as I believe the arch space is the same.
Last edited by andy sunny gti
on 2012-10-25
at 08-02-58.
Be the first to like this post.
Back to top
