Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Drag Strip Video Thread

+ Reply To Thread
Posts: 11-20 of 107
2011-05-26 15:44:27
#11
Lol the track I go to will let me do whatever I want. As long as I wear my seatbelt, and now a helmet, they don't care.
2011-05-26 22:16:29
#12
This is my contribution, This was a while back. Setup back then was :
Sr20DE
3 inch cold air intake
Factory Tubular headers
2 1/2 Inch exhaust
Stock shocks
Ebay coilovers
Stock GTS wheels(14 inch on 195/60 R14 tires)
Short shifter
Stock clutch ( was on its way out)
P10 primera(infinity g20 in the usa) gearbox

Don't have a time for the car with that setup though.

http://youtu.be/lcDVu25zk5Q


http://youtu.be/xAYP5MDhzEg
2011-05-27 04:07:41
#13
Here are mine.

60 trim T3 w/ .82 turbine housing at 24psi, stock intake manifold, 24.5X9 mt slicks

http://youtu.be/_N3Y223eIec

This was my T67 setup, aftermarket intake manifold, and 34psi of boost on m&h 25" slicks, bogged the launch pretty bad and bogged inbetween shifts cuz it just spun all the way down the track. Did have one run that was 137mph trap speed with only a 97mph 1/8th mile trap. Thats how bad I bogged the launch and bogged the 1-2 and 2-3 shift. 40mph backhalf ftw.

http://youtu.be/2zlI1O1gkDE

Going to change some stuff in the setup and still shooting for 700+whp and attempt to hit the 10s and 9s.
Last edited by ashtonsser on 2011-05-27 at 04-11-11.
2011-05-27 04:14:27
#14
I want to thank those that have, and anyone else willing to post there vids here. Whether it's stickied or not, at least they're in one thread people can look at.
2011-05-27 04:20:27
#15
Here's another video someone else did of mine. It was a botched run, which I explain in the comment part, but still lol.

YouTube - ‪hsvdragway8‬‏
2011-05-27 04:40:03
#16
thanks vadim
2011-05-27 04:54:43
#17
Lol I was like thanks for what? I had to go back to see that it was stickied now.


THANKS VADIM!!!!
2011-05-27 05:11:01
#18
and renamed


well heres mine, was waitin to post until i knew it was for sure..


nothin special.. the first video the other se-r is pretty much bone stock except a hot shot cai, second video same car but he had a 16ve engine/trans, In the 3rd video the second race im against a s13 with a det swap, i know its crap quality on that run cause the camera dude was MIA so another friend did it with his cell phone

B13, factory NON ac but has abs no weight reduction other then empty trunk an no carpet

this is my first time at the drag strip
mods:
sr20ve
hotshot header
2.5" exhaust
CAI

YouTube - ‪Lynch's Sentra‬‏

second time going to the drag strip basicly same setup except i took the CAI off an kept the short piece on and i changed from the calum ve bin to the alfred bin

YouTube - ‪sr20ve se-r @ Portland International Raceway ( PIR ) 04-16-10‬‏

second most recent
mods:
sr20ve
n1 cams
ssac header
2.5" exhaust
road tuned

YouTube - ‪sr20ve se-r @ Portland international raceway (PIR) on 09/24/10‬‏

Most recent

mods:
sr20ve
n1 cams
ssac header
3" exhaust
dyno tuned

http://www.youtube.com/watch?v=LXCxtoYSPVM

most current personal record is:
60' ---- 2.225
1/8 ---- 9.091 @ 78.96 mph
1/4 ---- 14.076 @ 98.78 mph
Last edited by lynchfourtwenty on 2011-06-26 at 02-39-38.
2011-05-29 20:06:28
#19
Here is my run with 410 WHP on a T3/T4 57 Trim Turbo on my VET with stock de crank with GTIR stock pistons and rods with stock sr20ve cams. JWT Computer with 555 nismo injectors and z32 maf. Mickey Thompson 24.5X8X15 Slicks on 15X8 Rims with 0 offset which is 4.5" Backspace.

60'----> 1.743
330'---> 4.850
1/8----> 7.351 @ 98.21 MPH
1000---> 9.518
1/4----> 11.324 @ 125.52 MPH

YouTube - ‪Edgar's SR20 VE+t 11.3 Run‬‏
Last edited by 10.1sr20de-t on 2011-05-29 at 20-10-03.
2011-05-30 10:24:05
#20
You going to fontucky in June edger?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top