Hello Calum - SR20 Community Forum

bigracer5 · 09-16-2008, 03:29 PM

I`m interested in a board for my B14, is a 1996 Sentra GSS..

S4 JWT Cams
Header Hotshot
CAI Hotshot
Flywheel Fidanza
91 oct gas

I dont want the realtime, just the single...
what is the procedure ??

I`m not going to send you my ECU, because is my daily drive, so just send me the board

Thank you !!

2dr_sentra · 09-16-2008, 04:02 PM

Why not just buy another ecu and swap them out, while your waiting on your new ecu?

bigracer5 · 09-16-2008, 04:30 PM

Quote:

Originally Posted by 2dr_sentra

Why not just buy another ecu and swap them out, while your waiting on your new ecu?

Here in Mexico the price of the ECU are expensive...so, is the easiest and the cheapest way for me

jagy · 09-16-2008, 05:19 PM

Calum never worked with S4 cams what i know.. i was searching same setup, but there is nothing like this on forums.
But i luckily found a guy from Greece, who tuned ~5cars with setup - 10:1 DE with S4, HS CAI, 4-1 header and 55mm exhaust to 190-200ps range and ~200Nm.

I dont know if it will work for B14, because its for B13, but i can ask him if i can share this *.bin.

bigracer5 · 09-16-2008, 06:02 PM

oh....so what is the best choice ?? a G20 ECU ??

My problem is the rev limiter, in my ECU is at 7100 RPM !!! and at that RPMs, the S4 still "pushing" so, thats why I want to change..

BenFenner · 09-16-2008, 06:07 PM

Buy an ECU from someone reputable in the states and have them send it to Calum instead of you. I have a 1994 B13 ECU laying around, not sure if that helps. =/

Calum · 09-17-2008, 12:59 PM

Well, I can setup a program for just the rev limiter, speed limiter, and help smooth the idle. Shipping just the board is no problem.

Ben- a 94 B13 ecu won't work for him. The 94 B13 ecu is an oddball, and just about worthless.

Calum · 09-17-2008, 01:00 PM

Quote:

Originally Posted by jagy

Calum never worked with S4 cams what i know.. i was searching same setup, but there is nothing like this on forums.
But i luckily found a guy from Greece, who tuned ~5cars with setup - 10:1 DE with S4, HS CAI, 4-1 header and 55mm exhaust to 190-200ps range and ~200Nm.

I dont know if it will work for B14, because its for B13, but i can ask him if i can share this *.bin.

It won't quite work, but I can convert it to B14.

bigracer5 · 09-17-2008, 01:11 PM

Quote:

Originally Posted by Calum

Well, I can setup a program for just the rev limiter, speed limiter, and help smooth the idle. Shipping just the board is no problem.

Ben- a 94 B13 ecu won't work for him. The 94 B13 ecu is an oddball, and just about worthless.

Excellent my friend..thats what I want...
What is the procedure ??

bigracer5 · 11-19-2008, 11:08 PM

Quote:

Originally Posted by Calum

Well, I can setup a program for just the rev limiter, speed limiter, and help smooth the idle. Shipping just the board is no problem.

Ben- a 94 B13 ecu won't work for him. The 94 B13 ecu is an oddball, and just about worthless.

Hello Calum, I want to order the board for my Sentra, what is the procedure ?? I will be in USA in one month aprox..

Thanks in advance for your attention

09-16-2008, 03:29 PM	#1 (permalink)
bigracer5 SR20 Newbie Join Date: Dec 2007 iTrader: (0)	Hello Calum I`m interested in a board for my B14, is a 1996 Sentra GSS.. S4 JWT Cams Header Hotshot CAI Hotshot Flywheel Fidanza 91 oct gas I dont want the realtime, just the single... what is the procedure ?? I`m not going to send you my ECU, because is my daily drive, so just send me the board Thank you !! __________________ Sentra GSS 96' - SR20DE - Manual Transmission - Nissan body kit - NGK BKR6EGP - Energy Suspension motor mounts- Hotshot CAI & Header - EGR Cancelled - BFgoodrich Gforce KDW 205/50/15 - Timming 15 - Ebay RSTB - Ebay FSTB - OBX muffler - 2.5 custom Catback - Grounding kit - Fidanza Flywheel - Exedy clutch kit - JWT S4 Camshaft http://i19.photobucket.com/albums/b1...racer5/MEW.png

09-16-2008, 04:02 PM	#2 (permalink)
2dr_sentra Boost crazy Join Date: Dec 2007 iTrader: (2)	Why not just buy another ecu and swap them out, while your waiting on your new ecu? __________________ SR20nation.com

09-16-2008, 05:19 PM	#4 (permalink)
jagy SR20LOVE Join Date: Dec 2007 Location: Czech republic iTrader: (0)	Calum never worked with S4 cams what i know.. i was searching same setup, but there is nothing like this on forums. But i luckily found a guy from Greece, who tuned ~5cars with setup - 10:1 DE with S4, HS CAI, 4-1 header and 55mm exhaust to 190-200ps range and ~200Nm. I dont know if it will work for B14, because its for B13, but i can ask him if i can share this *.bin. __________________ My parts WTB list Best Motoring Pulsar GTiR video DOWNLOAD HERE

09-16-2008, 06:02 PM	#5 (permalink)
bigracer5 SR20 Newbie Join Date: Dec 2007 iTrader: (0)	oh....so what is the best choice ?? a G20 ECU ?? My problem is the rev limiter, in my ECU is at 7100 RPM !!! and at that RPMs, the S4 still "pushing" so, thats why I want to change.. __________________ Sentra GSS 96' - SR20DE - Manual Transmission - Nissan body kit - NGK BKR6EGP - Energy Suspension motor mounts- Hotshot CAI & Header - EGR Cancelled - BFgoodrich Gforce KDW 205/50/15 - Timming 15 - Ebay RSTB - Ebay FSTB - OBX muffler - 2.5 custom Catback - Grounding kit - Fidanza Flywheel - Exedy clutch kit - JWT S4 Camshaft http://i19.photobucket.com/albums/b1...racer5/MEW.png Last edited by bigracer5 : 09-16-2008 at 06:05 PM.

09-16-2008, 06:07 PM	#6 (permalink)
BenFenner Member Join Date: Dec 2007 Location: Columbia, SC iTrader: (4)	Buy an ECU from someone reputable in the states and have them send it to Calum instead of you. I have a 1994 B13 ECU laying around, not sure if that helps. =/ __________________ BenFenner's 1994 Black SE-R

09-17-2008, 12:59 PM	#7 (permalink)
Calum ECU Guy Join Date: Dec 2007 Location: Lubbock, TX iTrader: (1)	Well, I can setup a program for just the rev limiter, speed limiter, and help smooth the idle. Shipping just the board is no problem. Ben- a 94 B13 ecu won't work for him. The 94 B13 ecu is an oddball, and just about worthless. __________________ calum@calumsult.com All text in this post is explicitly copyrighted by Calum and cannot be edited, deleted, or reproduced without the express permission of the author

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode