I need help calum - SR20 Community Forum

lowproki · 09-04-2008, 12:17 AM

Hi I bought a Calum ECU from a forum member that he said programed it for:

370inj.
N60 maf
at 4 bar

I have:

BC stage 2 cams
Greddy Springs
BB bottom block 8.5.1 copression with my Lowport head
GTI-R T28 turbo

The problem is the car dosent idle lots of gas is being dump into the pistons my oil is getting mixed with gas now.

The readings from the maf are 12 volts on one wire and other 2 is .02 and car it goes up to .29

lowproki · 09-04-2008, 12:50 AM

Ohh i forgot how much will u charge me to check the tune to see if its the right one i bouth the ecu of Wrights something like that is his screen name

Calum · 09-04-2008, 10:46 AM

Sounds like the MAF isn't wired correctly.

09-04-2008, 12:17 AM	#1 (permalink)
lowproki Member Join Date: Mar 2008 iTrader: (1)	I need help calum Hi I bought a Calum ECU from a forum member that he said programed it for: 370inj. N60 maf at 4 bar I have: BC stage 2 cams Greddy Springs BB bottom block 8.5.1 copression with my Lowport head GTI-R T28 turbo The problem is the car dosent idle lots of gas is being dump into the pistons my oil is getting mixed with gas now. The readings from the maf are 12 volts on one wire and other 2 is .02 and car it goes up to .29

09-04-2008, 10:46 AM	#3 (permalink)
Calum ECU Guy Join Date: Dec 2007 Location: Lubbock, TX iTrader: (1)	Sounds like the MAF isn't wired correctly. __________________ calum@calumsult.com All text in this post is explicitly copyrighted by Calum and cannot be edited, deleted, or reproduced without the express permission of the author

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-04-2008, 12:50 AM	#2 (permalink)
lowproki Member Join Date: Mar 2008 iTrader: (1)	Ohh i forgot how much will u charge me to check the tune to see if its the right one i bouth the ecu of Wrights something like that is his screen name