Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: 1995 200sx Se-R Stock Dyno (vid)

+ Reply To Thread
Posts: 1-7 of 7
2014-01-31 23:17:47
#1
1995 200sx Se-R Stock Dyno (vid)
Well guys at a meet we had two weekends ago we rented a dyno.

2 pulls on a mustang dyno.

unsure how correct these numbers are but more than I expected for stock.


2014-01-31 23:58:54
#2
a little high but if the motor is a freak then it's normal. I have seen some with exhaust and intake pull 130whp on the dyno jet I tune on.
2014-02-02 08:06:38
#3
Originally Posted by BlueRB240
a little high but if the motor is a freak then it's normal. I have seen some with exhaust and intake pull 130whp on the dyno jet I tune on.



awesome good to know! thanks man...... Eventually this motor will be swapped for a ve.
2014-02-02 16:50:04
#4
Nice numbers
2014-02-03 05:36:46
#5
Originally Posted by kenvq35
Nice numbers


thanks! I can't wait to fix up the looks then do some bolt ons or something to prep it for a ve swap.
2014-02-03 08:40:32
#6
Nice HP but the torque is low even for stock. Normally around 110ft-lbs, and the HP normally about 4-8hp less than what you got which is cool.

Saw you said you are going to go VE but would be cool if you got a cheap 91 intake cam and did nothing else to the car but slap it on go to the same dyno again. I don't know if there's any dyno charts putting a highport intake cam in a COMPLETELY STOCK lowport. All the dyno charts I've seen, the lowport already had an intake, exhaust, headers, ECU etc.
Last edited by Storm88000 on 2014-02-03 at 08-51-19.
2014-02-04 02:45:29
#7
Originally Posted by Storm88000
Nice HP but the torque is low even for stock. Normally around 110ft-lbs, and the HP normally about 4-8hp less than what you got which is cool.

Saw you said you are going to go VE but would be cool if you got a cheap 91 intake cam and did nothing else to the car but slap it on go to the same dyno again. I don't know if there's any dyno charts putting a highport intake cam in a COMPLETELY STOCK lowport. All the dyno charts I've seen, the lowport already had an intake, exhaust, headers, ECU etc.



If anyone was willing to donate some cams I would have no issue paying for the dyno pulls.

but yea I was expecting 110whp so 128whp is awesome haha
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top