Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Sr20 with sr16 piston problem

+ Reply To Thread
Posts: 1-10 of 12
2011-06-23 22:28:31
#1
Sr20 with sr16 piston problem
I recently finished putting sr16 in my sr20 engine started fine but I have too much
gas running through it. Just to turn on the car I have to disconnect the fuel pump
and the car still runs for like an hour.
i have the 259cc inj on it
2011-06-23 22:34:08
#2
??? wierd! Im gonna take a guess and say you have a leaking injector o-ring's where the go into the fuel rail.

easy and cheap fix
2011-06-23 22:55:10
#3
Oh ima have to check but it doesnt leak gas
2011-06-26 06:00:22
#4
i just finished putting together my motor with same set up, im having issues getting it to crank. good luck buddy.

Jorge
2011-06-26 16:14:53
#5
I got it to run know it was just the o-rings on the injectors.
yeah getting it to turn on thats always the hardest part.
2011-11-06 05:08:45
#6
is the sr16 piston plug in play in a sr20?
2011-11-06 06:22:40
#7
im having issues getting it to crank.
2011-11-07 08:18:46
#8
^ so what does it means?
2011-11-07 13:19:06
#9
Originally Posted by nany2201
im having issues getting it to crank.


I got an SR20VE with N1 pistons and it struggles a bit when cranking, I beleive it's due to the increased compression. That should be it!
2011-11-07 14:16:37
#10
Originally Posted by macakin
I got an SR20VE with N1 pistons and it struggles a bit when cranking, I beleive it's due to the increased compression. That should be it!


I don't know why, even with my 2.4 and other ones, we never had that struggling issue..
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top