Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: sr20 ITBs found

+ Reply To Thread
Posts: 1-10 of 58
2008-10-20 23:53:57
#1
sr20 ITBs found
Looking for ITB's for my spec v project(VQ) I came across this company. I havent been playing with sr20's in a while so I cant remember if the rwd and fwd have intake ports that line up, but figured it may help you all.

KIT: Nissan SR20DE/SR20DET ITBs
2008-10-21 00:56:00
#2
Martin Bruwer

cheaper and they make them for the VE's too!!
2008-10-21 02:18:49
#3
Originally Posted by Keo
Martin Bruwer

cheaper and they make them for the VE's too!!


What are the prices on those? ALSO, they have vacuum tap-offs. Can you just bolt this up and run it? I KNOW you'll need to tune it but can you run it simply BEFORE you get it tuned?
2008-10-21 02:29:08
#4
Damn that's pretty cheap! It says 4500 south african rand, which comes out to $448.21
2008-10-21 02:35:23
#5
Originally Posted by jer_760
Damn that's pretty cheap! It says 4500 south african rand, which comes out to $448.21


Is that really ALL? Has anyone run these on a VE yet? I am considering these.
2008-10-21 02:44:22
#6
didnt make much power on there dyno graph
2008-10-21 02:55:17
#7
Originally Posted by turbotank
didnt make much power on there dyno graph


I don't see a baseline run....
2008-10-21 04:43:41
#8
I can vouch for the bruwer itb's. Seen them on various cars incl a very good friend of mine (who's motor is the one shown on the website)

The dyno shows in kw and nm. 134kw to the wheels translates to around 184whp. This is on a high port DE with mostly headwork and itbs. That's pretty good in my book! Again, not sure how us dyno #'s compare to local, but I can tell you the car is strong!

I'm presonally running the VE ITB setup on my own car. Just getting the EMS fitted then she will be running. Next week or three.

Just bear in mind that the prices on the website are out of date. I paid ZAR6500 for my set over a year ago. So expect the prices to be a bit higher. Although the Rand/Dollar exhange has fallen for a ball of $hit in the last 2 weeks. It's like 10:1 now!!
2008-10-21 07:02:20
#9
hey doc can u post a pic of your setup? The last time I saw that setup it had an adapter plate to bolt the DE to the VE.
2008-10-21 09:36:52
#10
Originally Posted by BlueRB240
hey doc can u post a pic of your setup? The last time I saw that setup it had an adapter plate to bolt the DE to the VE.


Yeah that's the same setup. Port matched adaptor for the VE. It's a temporary setup, as Martin is going to design a new "adaptor" to match the bottom runners of the ve manifold to the ITB butterfly housings, which will give the setup a more angled stance. This will replace the custom cast runners drom the DE's that I'm using on the VE.

He's doing is specifically cause I want to utilize the optional carbon airbox with the ITB's, and I need more space for the airbox.

Pics haven't changed. Only it's in the car now.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top